Deutsch
Italiano
Français
Replacement valve 5-pack compatible with Majoni Fender | 9904
10,99 €
incl. 19% VAT excl. shipping fee
Out of stock
Designation:
Replacement valve for Majoni fenders
Here you will find matching fenders:
Star 10 boat fender
-> Boat fender Star 10 blue/white | Ø10×40 (cm) | 9920
-> Boat fender Star 10 black | Ø10×40 (cm) | 9926
Star 15 boat fender
-> Boat fender Star 15 blue/white | Ø12×45 (cm) | 9921
-> Boat fender Star 15 black | Ø12×45 (cm) | 9927
Star 25 boat fender
-> Boat fender Star 25 blue/white | Ø15×57 (cm) | 9922
-> Boat fender Star 25 black | Ø15×57 (cm) | 9928
Star 35 boat fender
-> Boat fender Star 35 blue/white | Ø21×62 (cm) | 9923
-> Boat fender Star 35 black | Ø21×62 (cm) | 9929
Star 45 boat fender
-> Boat fender Star 45 blue/white | Ø24×70 (cm) | 9924
-> Boat fender Star 45 black | Ø24×70 (cm) | 9930
Star 55 boat fender
-> Boat fender Star 55 blue/white | Ø30×90 (cm) | 9925
-> Boat fender Star 55 black | Ø30×90 (cm) | 9931
REPLACEMENT VALVE FOR MAJONI AND STAR FENDER
Our replacement valve is compatible with all inflatable Majoni fenders and Star fenders in our range.
In addition to the seams, the valves can also be a typical weak point on fenders, as both can be potential points for leaks. If the fender loses air at the valve, replacing the valve offers the opportunity to save the boat fender instead of throwing it away. This is an environmentally friendly alternative and saves the unnecessary replacement of the fender.
Replacing the valve is very simple: first remove the defective valve by screwing an M3 screw into the valve and pulling it out with pliers. Then insert the replacement valve and press it into the fender using pliers. Once the replacement valve is firmly in place, remove the screw and your fender is ready to inflate.
| Weight | 0,025 kg |
|---|---|
| Dimensions | 0,42 × 0,21 × 0,21 cm |
| Filter Fender | Replacement valve |
