Replacement valve 5-pack compatible with Majoni Fender | 9904 (Kopie)

Valve adapter for Majoni fenders

Majoni fenders are known for their robustness and reliability and have established themselves as essential equipment for boats and yachts. To maximize the functionality of these fenders, the right valve adapter is crucial. This special adapter not only makes it easier to inflate and deflate the fenders, but also ensures a long service life and easy handling.

What is a valve adapter for Majoni fenders?

A valve adapter for Majoni fenders is a small but extremely important accessory that has been specially developed to connect the valve of the fenders to standard pumps. The advantage of this adapter is its compatibility with car valves (Schrader valves), which are used in many bicycle and car pumps. This enables convenient use of existing pumps and makes inflating the fenders considerably easier.

How to use the valve adapter?

Using the valve adapter is very simple:

1. Connect the adapter to the pump: screw or plug the adapter onto the pump, depending on the model.
2. Place the adapter on the valve of the fender: Press the adapter firmly onto the valve of the fender until it is securely in place.
3. Inflate the fender: Pump air into the fender until the desired pressure is reached.
4. Remove the adapter: Carefully remove the adapter after quickly closing the valve to prevent air loss.

REPLACEMENT VALVE FOR MAJONI AND STAR FENDERS

Our replacement valve is compatible with all inflatable Majoni fenders and Star fenders in our range.

In addition to the seams, the valves can also be a typical weak point on fenders, as both can be potential points for leaks. If the fender is losing air at the valve, replacing the valve offers the opportunity to save the boat fender instead of throwing it away. This is an environmentally friendly alternative and saves the unnecessary replacement of the fender.

Replacing the valve is very simple: first remove the defective valve by screwing an M3 screw into the valve and pulling it out with pliers. Then insert the replacement valve and press it into the fender, also using pliers. As soon as the replacement valve is firmly in place, remove the screw and your fender is ready to be inflated.